Xiamen Sunforson Power Co.,Ltd
Call us on:+86-592-5735570    E-mail: info@sunforson.com
Knowledge
Home > Knowledge > Content

How to install the Sunrack L-feet

Xiamen Sunforson Power Co.,Ltd | Updated: Jan 12, 2018
Source:

G-module Installation.

For each use of the G module. You must make sure that: the thread of the screws does not project through the lower side of the G module (max flush).Position the G Module in the rail channel and fasten it loosely with 2 to 3 turns of the screw. The screws can still be freely moved in the rail channel. Slide the screw to their final position in connection with the inter-module lamp ,module end clamp or L feets/hanger bolts and fastens firmly(recommended torque is 8 N.m). As the Figure 1.

1.jpg

Figure 1

L-Feet install with the Rail.

1).L-Feet Pre Installation.

2.jpg

Figure 2

Follow Figure 2 red mark A, keep the M8*25 Bolt no beyond the G module.

2).Install the L-Feet to the roof.

3).Install the Rail

a).

3.jpg

4.jpg

Figure 2

Keep the Bolt in the position as the Figure 2 red mark A,

b).

5.jpg

6.jpg

Figure 4

c).

7.jpg

8.jpg

Figure 5

Keep the Rail on the L-feet Position as the Figure 5

9.jpg

Figure 6

Press the rail and let the G-module in the position as the Figure 6

10.jpg

11.jpg

 Figure 7

Lock the Bolt, let the bolt exceed the G-moudle 3~4mm as the Figure 7 , Remember do not tighten bolt,then the rail and l-feet can be moved per your demand .

d).

12.jpg

Figure 9

Let the rail leave the L-Feet a little Gap, that the rail can adjusted up or down.

13.jpg

14.jpg

Figure 10

Adjusted the Rail in the Position that you want, and fastens firmly.


Product Categories

Fast Track


Copyright © Xiamen Sunforson Power Co.,Ltd